Luxury Marble Drawer Handle

Material: Natural Marble (Calacatta, Nero Marquina, Verde Guatemala, Beige Travertine)
Hardware: Solid Brass with Antique finish
Profile: Rounded D-shape
Sizes Available: 96mm (3.8"), 128mm (5"), 160mm (6.3")
Mounting: Center-to-center hole spacing
Weight: Approx. 0.8 lbs per handle
Finish: Polished marble, Antique brass
Hole Diameter: 5mm
Screw Length: 25mm (included)
Packaging: Premium foam insert in branded box
Application: Cabinets, drawers, wardrobes, furniture
Style: Modern Luxury, Contemporary

1. Measure and mark hole positions on drawer/cabinet front (use template if provided)
2. Drill pilot holes using 5mm drill bit - use masking tape to prevent chipping
3. For marble surfaces, drill slowly with constant light pressure
4. Insert brass screws through handle from front side
5. Align handle with drilled holes and push screws through
6. From inside drawer, thread brass nuts onto screws hand-tight
7. Use screwdriver to tighten screws gently - DO NOT OVERTIGHTEN (marble can crack)
8. Check alignment and adjust if needed before final tightening
9. Clean any fingerprints or dust with soft cloth
10. Allow 24 hours before heavy use to ensure secure mounting

⚠️ Important: Marble is natural stone - handle with care during installation. Over-tightening can cause cracks.

Clean with soft, damp microfiber cloth only. Use pH-neutral stone cleaner for stubborn marks. Never use acidic cleaners (vinegar, lemon) or abrasive materials on marble. Wipe spills immediately to prevent staining. For brass hardware, use brass polish occasionally to maintain shine. Avoid harsh chemicals and steam cleaners. Reseal marble annually with stone sealer for best protection. Handle with care during cleaning to avoid stress on mounting points.